Ekspansjonsbolt, A4 syrefast stål
Heavy duty ekspansjonsbolt for medium laster, i str. M6-M20 til montering i ikke-sprukket betong C20/25 – C50/60.







Produktinformasjon
Egenskaper
Materiale
A4 syrefast stål
Fordeler
- Bredt sortiment
- Enkel montering
- Allsidig bruksområde
- Kaldformet stål
- Økt tykkelse av ekspansjons segmenter
- Seks tenner og antislipp gir effektiv montering
Applikasjoner
Bruksområde
- Rekkverk
- Metall- og trearbeid
- Fasader
Egnet for
- Ikke-sprukket betong
- Stein
- Korrosivt miljø
Tekniske data
Product Dimensions
| Referanse | Metallic fixings dimensjoner | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| annet | produktreferanse | produktdimensjoner[mm] | |||||||||
| NOB nr. | Fixture tykkelse [tfᵢₓ,ₘₐₓ] with standard setting dybde [hₑf,ₛₜD][mm] | Fixture tykkelse [tfᵢₓ,ₘₐₓ] with reduced setting dybde [hₑf,ᵣₑD][mm] | hull diameter [dₒ] x dybde [h₁] in substrate[mm] | Min. setting dybde [hₑf][mm] | antall per eske[stk] | antall per outer eske | vekt[kg] | dimensjoner[mm] | gjenge lengde [Lv][mm] | ||
| 7532000807500 | 60743010 | 15 | 25 | 8x60 | 40 | 100.0 | 400 | 0.03 | FM-753 A4 | M8x75 | 48 |
| 7532000811500 | 60743011 | 55 | 65 | 8x60 | 40 | 100.0 | 400 | 0.043 | FM-753 A4 | M8x115 | 83 |
| 7532001006000 | 60343012 | - | 5 | 10x55 | 35 | 50.0 | 500 | 0.044 | FM-753 A4 | M10x60*/** | 28 |
| 7532001009000 | 60743014 | 20 | 35 | 10x70 | 50 | 50.0 | 200 | 0.059 | FM-753 A4 | M10x90 | 55 |
| 7532001012000 | 60743015 | 50 | 65 | 10x70 | 50 | 50.0 | 200 | 0.074 | FM-753 A4 | M10x120 | 85 |
| 7532001210000 | 60743016 | 10 | 25 | 12x85 | 60 | 50.0 | 200 | 0.093 | FM-753 A4 | M12x100 | 58 |
| 7532001213500 | 60743018 | 45 | 60 | 12x85 | 60 | 25.0 | 100 | 0.12 | FM-753 A4 | M12x135 | 93 |
* Anchors with reduced embedment depths
** Not covered by CE certification
Design capacities - single anchor - no edge distances
| Referanse | Metallic fixings dimensjoner | Metallic fixings loads | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| produktdimensjoner[mm] | produktreferanse | dimensjonerende kapasitet - urisset betong (3)[kN] | |||||||||
| dimensjoner[mm] | Bøyemoment MRd[Nm] | strekk - NRd (1) | skjær - VRd (1-2)[kN] | ||||||||
| C20/25[kN] | C30/37[kN] | C40/50[kN] | C50/60[kN] | C20/25[kN] | C30/37[kN] | C40/50[kN] | C50/60[kN] | ||||
| 7532000807500 | M8x75 | FM-753 A4 | 18.04 | 5 | 5.85 | 6.6 | 7.1 | 8.3 | - | - | - |
| 7532000811500 | M8x115 | FM-753 A4 | 18.04 | 5 | 5.85 | 6.6 | 7.1 | 8.3 | - | - | - |
| 7532001006000 | M10x60*/** | FM-753 A4 | 36.84 | 8 | 9.76 | 11.28 | 12.4 | 11.6 | - | - | - |
| 7532001009000 | M10x90 | FM-753 A4 | 36.84 | 8 | 9.76 | 11.28 | 12.4 | 11.6 | - | - | - |
| 7532001012000 | M10x120 | FM-753 A4 | 36.84 | 8 | 9.76 | 11.28 | 12.4 | 11.6 | - | - | - |
| 7532001210000 | M12x100 | FM-753 A4 | 63.9 | 15.2 | 18.544 | 21.432 | 23.56 | 20.6 | 20.6 | 20.6 | 20.6 |
| 7532001213500 | M12x135 | FM-753 A4 | 63.9 | 15.2 | 18.544 | 21.432 | 23.56 | 20.6 | 20.6 | 20.6 | 20.6 |
1. The design loads loads have been calculated using the partial safety factors for resistances stated in ETA-approval(s). The loading figures are valid for unreinforced concrete and reinforced concrete with a rebar spacing s ≥ 15 cm (any diameter) or with a rebar spacing s ≥ 10 cm, if the rebar diameter is 10mm or smaller.
2. The figures for shear are based on a single anchor without influence of concrete edges. For anchorages close to edges (c ≤ max [10 hef; 60d]) the concrete edge failure shall be checked per ETAG 001, Annex C, design method A.
3. Concrete is considered non-cracked when the tensile stress within the concrete is\sigmaL +\sigmaR ≤ 0. In the absence of detailed verification\sigmaR = 3 N/mm² can be assumed (\sigmaL equals the tensile stress within the concrete induced by external loads, anchors loads included).
*) Short series with reduced embedment depth
**) Not covered by CE certification
Montering
Installation data
| Referanse | Metallic fixings dimensjoner | monteringsdata | |||||||
|---|---|---|---|---|---|---|---|---|---|
| produktdimensjoner[mm] | produktreferanse | annet | monteringsdata | avstand and kant distances | |||||
| dimensjoner[mm] | Skiftenøkkel [SW][mm] | hull diameter in fixture [df][mm] | Ø drilling hull[mm] | Min. drill dybde[mm] | montering torque[Nm] | Embedment dybde[mm] | Min. støtte tykkelse[mm] | ||
| 7532000807500 | M8x75 | 13 | FM-753 A4 | 9 | 8 | 60 | 15 | 40 | 100 |
| 7532000811500 | M8x115 | 13 | FM-753 A4 | 9 | 8 | 60 | 15 | 40 | 100 |
| 7532001006000 | M10x60*/** | 17 | FM-753 A4 | 12 | 10 | 55 | 25 | 35 | 100 |
| 7532001009000 | M10x90 | 17 | FM-753 A4 | 12 | 10 | 70 | 25 | 50 | 100 |
| 7532001012000 | M10x120 | 17 | FM-753 A4 | 12 | 10 | 70 | 25 | 50 | 100 |
| 7532001210000 | M12x100 | 19 | FM-753 A4 | 14 | 12 | 85 | 50 | 60 | 120 |
| 7532001213500 | M12x135 | 19 | FM-753 A4 | 14 | 12 | 85 | 50 | 60 | 120 |
* Not included in the approval
Spacings and Edge distances
| Referanse | Metallic fixings dimensjoner | monteringsdata | ||||
|---|---|---|---|---|---|---|
| produktdimensjoner[mm] | produktreferanse | avstand and kant distances | ||||
| dimensjoner[mm] | Min. kant avstand[mm] | Min. avstand[mm] | karakteristisk kantavstand[mm] | karakteristisk avstand(5) - Scr,N[mm] | ||
| 7532000807500 | M8x75 | FM-753 A4 | 60 | 60 | 60 | 120 |
| 7532000811500 | M8x115 | FM-753 A4 | 60 | 60 | 60 | 120 |
| 7532001006000 | M10x60*/** | FM-753 A4 | 75 | 75 | 75 | 150 |
| 7532001009000 | M10x90 | FM-753 A4 | 75 | 75 | 75 | 150 |
| 7532001012000 | M10x120 | FM-753 A4 | 75 | 75 | 75 | 150 |
| 7532001210000 | M12x100 | FM-753 A4 | 90 | 90 | 90 | 180 |
| 7532001213500 | M12x135 | FM-753 A4 | 90 | 90 | 90 | 180 |